The DRV632 is a 2-VRMS pop-free stereo line driver designed toallow the removal of the output dc-blocking capacitors for reduced component count and cost. Thedevice is ideal for single-supply electronics where size and cost are critical designparameters.

Designed using TI’s patented...

Single-channel Isolated 24-V to 60-V digital input receiver for digital input modules  

The ISO1211 and ISO1212 devices are isolated 24-V to 60-Vdigital input receivers, compliant to IEC 61131-2 Type 1, 2, and 3 characteristics. These devicesenable 9-V to 300-V DC and AC...

2.5-kVrms, isolated unidirectional clock, bidirectional I2C isolator  

The ISO1540 and ISO1541 devices are low-power, bidirectional isolators that are compatible withI2C interfaces. These devices have logic input and output buffers thatare separated by Texas Instruments...

Sitara processor: Arm Cortex-A8, video front end

(AM3517/05 is a high-performance ARM Cortex-A8 microprocessor with speeds up to 600 MHz. The device offers 3D graphics acceleration while also supporting numerous peripherals, including DDR2, CAN, EMAC, and USB OTG PHY that are well suited...

The Texas Instruments bq4050device, incorporating Compensated End-of-Discharge Voltage (CEDV) technology, is a highlyintegrated, accurate, 1-series to 4-series cell gas gauge and protection solution, enablingautonomous charger control and cell balancing.

The bq4050 device provides a...

High-side n-channel FET driver

The bq76200 device is a low-power, high-side, N-channel system. Ahigh-side protection avoids ground disconnection in the system and also allows continuouscommunication between the battery pack and host system. The device has additional P-Channel FETcontrol...

Low-power Sub-1 GHz wireless transceiver

CC1101 is a low-cost sub-1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915...

Value line Sub-1 GHz wireless transmitter 

Few External Components; Fully Integrated Frequency Synthesizer

Green Package: RoHS Compliant and No Antimony or Bromine

Small Size (QLP 4x4 mm Package, 20 pins)

Suited for Systems Targeting Compliance with EN 300 220...

12-V, N channel NexFET™ power MOSFET, single LGA 1 mm x 0.6mm, 180 mOhm, gate ESD protection                                                         ...

30-V, N channel NexFET™ power MOSFET, single SON 2 mm x 2 mm, 32 mOhm                                     

 This 30-V, 24-mΩ, 2-mm × 2-mm SON NexFET™ power MOSFET is designed to minimize...

The -12-V, P channel NexFET™ power MOSFET, single LGA 0.6 mm x 0.7 mm, 116 mOhm, gate ESD protection                                                     ...

Dual-channel, 2/0, 150-Mbps digital isolator  

The ISO7220x and ISO7221x family devices are dual-channel digital isolators. To facilitate PCB layout, the channels are oriented in the same direction in the ISO7220x and in opposite directions in the ISO7221x. These devices have a...

18-channel I2C constant-current RGB LED driver

In smart homes and other applications that utilize human-machine-interaction,high-performance RGB LED drivers are required. LED animation effects such as flashing, breathing,and chasing greatly improve user experience, and minimal system...

24-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC w/ PGA, VREF, 2x IDACs & SPI interfaceData converters

The ADS1220 is a precision, 24-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications...

Standalone 1-cell 1-A linear battery charger with 4.2-V VBAT and Temperature Sensing   

The BQ2404x series of devices are highly integrated Li-Ion and Li-Pol linear chargers devices targeted at space-limited portable applications. The devices operate from either a USB port or...

The BQ2407x series of devices are integrated Li-Ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or an AC adapter and support charge currents up to 1.5 A. The input voltage range with input...

The BQ2407x series of devices are integrated Li-Ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or an AC adapter and support charge currents up to 1.5 A. The input voltage range with input...

The bq24259 is a highly-integrated switch-mode battery charge management and system power path management device for 1 cell Li-Ion and Li-polymer battery in a wide range of smart phone and tablet applications. Its low impedance power path optimizes switch-mode operation efficiency, reduces...

The bq24259 is a highly-integrated switch-mode battery charge management and system power path management device for 1 cell Li-Ion and Li-polymer battery in a wide range of smart phone and tablet applications. Its low impedance power path optimizes switch-mode operation efficiency, reduces...

I2C controlled 1-cell, 3-A battery charger with USB NVDC-1, adj. voltage, and USB OTG with D+/D-

The bq24296/bq24297 are highly-integrated switch-mode battery charge management and system power path management devices for 1 cell Li-Ion and Li-polymer batteries in a wide range of smart...

The BQ2970 battery cell protection device provides an accurate monitor and trigger threshold for overcurrent protection during high discharge/charge current operation or battery overcharge conditions.

The BQ2970 device provides the protection functions for Li-ion/Li-polymer cells, and...

The BQ2970 battery cell protection device provides an accurate monitor and trigger threshold for overcurrent protection during high discharge/charge current operation or battery overcharge conditions.

The BQ2970 device provides the protection functions for Li-ion/Li-polymer cells, and...

Analog front end for 3 to 6 series lithium-ion cells

BQ76925 host-controlled analog front end (AFE) is part of a complete pack monitoring,balancing, and protection system for 3-, 4-, 5-, or 6-series cell li-ion and li-polymer batteries.The BQ76925 device allows a host controller to...

3-s to 16-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4

The Texas Instruments BQ76952 device is a highly integrated, high-accuracy battery monitor and protector for 3-series to 16-series Li-ion, Li-polymer, and LiFePO4 battery packs. The device includes...

6-ch, 3-V to 18-V inverters   

The CD4069UB device consist of six CMOS inverter circuits. These devices are intendedfor all general-purpose inverter applications where the medium-power TTL-drive andlogic-level-conversion capabilities of circuits such as the CD4009 and CD4049...

12-V, N channel NexFET™ power MOSFET, single LGA 1 mm x 0.6mm, 44 mOhm, gate ESD protection                                                         ...

Synchronous Buck NexFET Power Stage, CSD95379Q3M                                               

 The CSD95379Q3M NexFET™ power stage is a highly optimized design...

52-V, bipolar stepper motor gate driver with 1/256 microstepping & stall detect  

The DRV8711 device is a stepper motor controller that uses external N-channel MOSFETs todrive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated,which is...

Isolated 5-V CAN transceiver    

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic...

  100-mA, 30-V, low-dropout voltage regulator with power good & enable

LP2950 and LP2951 devices are bipolar, low-dropout voltage regulators that can accommodate a wide input supply-voltage range of up to 30 V. The easy-to-use, 3-pin LP2950 is available in fixed-output voltages...