1. Charging voltage: DC 4.2--5V CC/cv 2.Single battery current consumption: < = 6uA continuous discharge current 2.5A 3.Charging detection voltage: 4.2 V+/- 0.025V 4.Charge detection delay time: 150-500 ms 5.Charge recovery voltage: 4.0V+/- 0.025V 6.Discharge detection voltage: 2.75V +/-0.1V...

Charging voltage: 4.2-5V The overcharge and overdischarge voltage of the protection board is 2.75V-4.2V, and the maximum current of the protection board is 6A-8A The operating temperature range is -40°C ~+50°C for low-current digestion. Size: 16mm 

Overcharge voltage: 4.25+0.05V Overcharge release voltage: 4.23+0.05V;Overdischarge voltage: 2.54+0.1V Maximum Continuous Charge/Discharge Current: 7.5A ;Maximum Discharge Current: 10A Size: L35*W7*T2mm; Weight: 10g

Overcharge voltage: 4.25: 0.05V; Overcharge release voltage: 4.23+0.05V. Overdischarge voltage: 2.54+0.1V; Maximum Continuous Charge/Discharge Current: 13A. Maximum Discharge Current: 15A; Size: L35*W7*T2mm; Weight: 10g.

Lithium battery protection board has a variety of current specifications and other specifications; The more batteries are connected in series, the greater the voltage, the more batteries are connected in parallel, the larger the battery capacity, and the greater the discharge current; For...

Overcharge voltage range: 4.25-4.35V+0.05V ;Size: 17.5*17.5*3.2mm; Over-discharge voltage range: 2.5-3.0v±0.05V; Upper working current: 5A. Operating temperature: -40 --- + 50°C; Maximum instantaneous current: 7A; Storage conditions: -40--+80°C. Quiescent Current: Less than 10uA ；Active Life:...

Product introduction 1. Overcharge detection voltage: 4.28+/-0.05 meters 2. Overcharge release voltage: 4.20+/-0.05V 3. Over-discharge detection voltage: 3.00+/-0.05V 4. Over-discharge discharge voltage: 3.20+/-0.05V 5. Short circuit protection detection delay time:

Parameter: Overcharge voltage: 4.25-4.35v+0.05V; Overvoltage: 2.5-3.0v±0.05V; Maximum continuous current: 8A;Maximum Peak Current: 15A Operating Temperature: -40 --- + 50; Storage Temperature: -40 -- +80.Small Current: Less than 3uA; Life cycle: more than 50,000 hours ;Resistance: less than 300mQ...

Specification: Charging Voltage: DC 9V cc/cV (Max: 12V) Single current consumption (consumption) ≤ 6UA maximum continuous discharge current: 4A; Overcharge detection voltage: 4.29V accuracy ≤+0.025V. Overcharge detection delay time: 1 second Overcharge recovery voltage: 4.05V accuracy ≤+0.025V...

Module parameters: Power supply voltage: DC2.2-12V Output voltage: 1.8-12V adjustable (according to the supply voltage) Output current: less than 2A Switch function: Yes Speed range: 0-100% SIZE: 32MM*32MM*12MM Special Reminder: The DC motor governor is connected to the DC power supply, and must...

Module parameters：  Voltage range: DC 6V-28V Current range: within 3A Switching function: Yes Speed range: 0-100% SIZE: 32MM*50MM*15MM Special Reminder: The DC motor governor is connected to the DC power supply, and must not be directly connected to the household 220V AC.

Module Parameters: Working voltage: DC4.5V-35V Output current: 0-5A Output Power: 90W (Max) Quiescent Current: 7UA (Standby) PWM Duty Cycle: 1%-100 % PWM Frequency: 20KHZ SIZE: 30MM X 26MM X 14MM (Without Handle)

Module Parameters:  Working voltage: DC4.5V-35V Output current: 0-5A Output Power: 90w (Max) Quiescent Current: 7UA (Standby) PWM Duty Cycle: 1%-100% PWM Frequency: 20KHZ Size: 30MM X 26MM X 14MM (WITHOUT HANDLE)

Module parameters： Input supply voltage: 6V-30V DC Output current: rated current 5A (maximum 8A, can not be extended) PWM frequency: 16KHZ Duty Cycle Adjustable: 0%-100%  Digital Display Duty Cycle Size (L*w*H): 7.8x4.2×2.5CM

Module Parameters:  Maximum Voltage: 16V Minimum Voltage: 5V Continuous Current: 10A Short Circuit Maximum Current: 20A (less than 10 seconds) Control mode: PWM stepless speed regulation, can also be used to adjust the light control mode: speed control potentiometer (turn on clockwise,...

Module parameters Working voltage: DC12V-DC40V Control power: 0.01-400w  Current: Rated current 8A, maximum passing current 10A Quiescent current: 0.02A (standby state) PWM duty cycle: 10%-100% PWM frequency: 13KHZ SIZE: 60*55*28MM, FOUR POSITIONING HOLES ARE 5MM AWAY FROM THE EDGE OF THE...

Overcharge voltage range: 4.25-4.35V+0.05V ;Size: 46.7*23*3.15mm ;Over-discharge voltage range: 2.5-3.0v soil 0.05V. Upper working current: 10A Operating temperature: -40 ---+50°C ;Maximum instantaneous current: 20A ;Storage conditions: -40-- +80°C ;Quiescent current: less than 10uA ;Active life:...

Charging Voltage: 8.4V - 9.oV Continuous Discharge Current (Maximum): 20A (If the cooling environment is not good, reduce the load current use) Continuous charging current (upper limit): 10A Standard Version: Suitable for rigs with currents up to 25A below 50W or resistive loads below 168W....

Charging Voltage: 8.4V - 9.0V Continuous Discharge Current (Maximum): 20A (If the cooling environment is not good, reduce the load current use) Continuous charging current (upper limit): 10A. Standard Version: Suitable for rigs with currents up to 25A below 50W or resistive loads below 168W....

OVERCHARGE VOLTAGE RANGE: 4.25-4.35V±0.05V; OVERDISCHARGE VOLTAGE RANGE: 2.3-3.0V±0.05V SIZE: 53*17*4MM ;Operating current: 0-10A ; It is recommended to use the operating temperature within 8A: -40-+50°C ;Instantaneous current: 11-13A ; Storage conditions: -40 - +80°C Quiescent current: less than...

Scope of application: suitable for 3.6V 3.7V nominal voltage lithium battery (including 18650, 26650 lithium polymer batteries). PRODUCT： SIZE: 59*20*3.4MM ;PRODUCT WEIGHT: 4.4G ;Charging voltage: 12.6V-13V;Max output current: 20A ;Max output power/charging power: 252W. Note 1: 3 x 15C-20C power...

Overcharge detection voltage: 4.25±0.025V; Overcharge boost voltage: 4.15±0.05V; Overdischarge detection voltage: 2.50±0.08V Overdischarge boost voltage: 3.00±0.1V ;Overcurrent current: 20-30A ;Operating current 15A (free cooling 10.A, heating sheet 15A, maximum instantaneous current 30A)...

Overcharge voltage range: 4.25-4.35V ± 0.05V; Overdischarge voltage range: 2.3-3.0V±0.05V. Size: 67*16*1.0mm; Maximum working current: 6A; Maximum instantaneous current: 6-7A. Working temperature: -40-+50°C; Storage conditions: -40-+80°C ;Static current: less than 6uA; Active life: days less than...

1. Module name: 4 strings of lithium battery protection board. 2. Modular nature: polymer lithium battery protection board. 3. Overcharge detection voltage: 4.25 soil 0.025V. 4. Overcharge release voltage: 4.15 soil 0.05V. 5. Overdischarge detection voltage: 2.50 ± 0.08V. 6. Over-discharge...

Charging voltage: 16.8V -18.1V; Continuous discharge current (maximum): 40A (if heat dissipation environment Not good, please reduce the load current to use) continuous charging current (upper limit): 20A ;Standard version (without equalization): suitable for electric drills with starting current...

Charging voltage: 16.8V -18.1V ;Continuous discharge current (maximum): 40A (if heat dissipation environment Not good, please reduce the load current to use) continuous charging current (upper limit): 20A; Standard version (without equalization): suitable for electric drills with starting current...

Module Parameters: Voltage: AC 220V Max power: 2000w Voltage regulation: AC 50-220V SPECIFICATION SIZE: HIGH TEMPERATURE RESISTANT FR-4 CIRCUIT BOARD CIRCUIT BOARD 36MM*48MM EXTERNAL SIZE: 48MM*6OMM*28MM (HIGH) SILICON CONTROL WITHSTAND VOLTAGE UP TO 1200VOLT / CURRENT 25A 1.6mm thickened epoxy...

Module Parameters: Voltage: AC 220V Max power: 2000w Voltage regulation: AC 50-220V SPECIFICATION SIZE: HIGH TEMPERATURE RESISTANT FR-4 CIRCUIT BOARD CIRCUIT BOARD 36MM*48MM OUTER SIZE: 48MM*6OMM (KNOB DIRECTION) *28MM (HEIGHT) Silicon control withstand voltage up to 1200 volts / current 25A...

Features: Special design with 1.6 thick FR-4 high temperature resistant circuit board. It is safe and reliable to cope with high currents. Dual-capacitance design: Safety capacitors and metal film capacitors are more effective in protecting SCR. Higher efficiency and safer.1.5 thick aluminum and...

The output is recommended not to short circuit, you must first connect the load, and then adjust the voltage! Natural heat dissipation is recommended to work for a long time within 2000W, more than please strengthen the heat dissipation! Specifications: Product name: 4000W AC voltage regulator...