Brief Introduction

STWB20X75S

Flexible installation: both the slider and the body can be installed, there are mounting holes on three sides of the fixed plate, and there are installation holes on each side of the body in addition to the axial direction, which can adapt to a variety of installation scenarios and facilitate the installation of users according to actual needs.Convenient piping: There are two sets of inlet and exhaust ports on both sides of the cylinder, and users can choose the appropriate interface according to the air circuit layout and system requirements, reducing the difficulty of piping.High guiding accuracy: Extended sliding support guide is adopted, no additional lubrication is required, good guiding performance, high non-rotation accuracy, small piston rod end deflection, suitable for occasions with high requirements for guiding accuracy.Strong load capacity: it has certain anti-bending and torsional performance, can withstand certain lateral loads and large moving loads, and can operate stably under complex working conditions.Good cushioning performance: The anti-collision pad at the front end of the body can adjust the stroke of the cylinder, alleviate the impact, reduce the shock and vibration when the cylinder moves to the end point, and prolong the service life.Standard configuration with magnet: It is a magnet-type cylinder, which can be used with sensors such as magnetic switches, which is convenient for automatic control and position detection.