USD
- USD
- CNY
- HKD
- EUR
English
- العربية
- čeština
- dansk
- Deutsch
- Ελληνικά
- English
- Español
- Français
- ic
- Italiano
- Netherlands
- norsk Språk
- język polski
- pt
- Português
- 中文
plc Price List
| Model | Description | Leading | Price |
|---|---|---|---|
| ABB AC500-eCo | |||
|
Model: TA5220-SPF8.Product Description: The AC500-eCo terminal block set, which is a spare part for the option board, is an 8-pole spring terminal with a total of 8 pieces.IP20 protection level for a certain degree of protection against dust and foreign objects.
|
In Stock
|
Subscribe
|
|
|
Number of output points and type: 8 thyristor outputs: 245.Output current: 0.3A245 maximum per channel.Output Voltage: Typically operating voltage is 24V DC8.Power Consumption: The current consumption from a 24V DC power supply is approximately 30mA.Operating temperature: typically 0°C to +60°C;...
|
In Stock
|
Subscribe
|
|
|
Number of output points: 16 digital output channels, 3 transistor outputs.Output Voltage: Rated operating voltage is 24V DC3.Output Current: 0.5A maximum current per point, common side maximum current not mentionedPower Consumption: The current drawn from a 24V DC supply is approximately 10mA;...
|
In Stock
|
Subscribe
|
|
|
The DI571 is a digital input module with 8 digital input channels and input voltages ranging from 100V AC to 240V ACIsolation characteristics: Galvanic isolation between the channels and the rest of the module, the number of isolation groups is 8, 1 channel per groupPower Consumption: The current...
|
In Stock
|
Subscribe
|
|
|
The ABB DC562 is the S500-eCo digital input/output moduleNumber and type of input points: 16 configurable digital input points, available as source or drain inputs, with input voltage type DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output...
|
In Stock
|
Subscribe
|
|
|
The ABB AI562 is an analog input module of the AC500-eCo series for RTD temperature measurementSupply voltage: 24V DC, permissible voltage range - 15% to + 20%.Power Consumption: The current drawn from a 24V DC supply is approximately 5mA, with an inrush current of 0.05A²s at start-up and a...
|
In Stock
|
Subscribe
|
|
|
Memory: 8MB, the memory type is RAM, and the actual usable memory is about 9100KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital...
|
In Stock
|
Subscribe
|
|
|
Memory: 8MB, memory type is RAM, actual usable memory is 9100KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 8 x 24V DC,...
|
In Stock
|
Subscribe
|
|
|
Memory: 4MB, memory type is RAM, actual usable memory is 7032KB.Processing speed: The controller processing time is 0.00002ms.Supply voltage: The rated voltage is DC 24V, and the supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 6 relay-type...
|
In Stock
|
Subscribe
|
|
|
Memory: 5032KB, memory type is RAM.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 6 relay-type digital output points, 2 configurable digital I/O points,...
|
In Stock
|
Subscribe
|
|
|
Memory: Has 5032KB of RAM memory.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 12 digital input points of 24V DC.Digital outputs: There are 8 24V DC, 0.5A transistor-based digital output...
|
In Stock
|
Subscribe
|
|
|
Operating temperature: -20°C to 60°C2.Degree of protection: IP20.Memory: It has 1008KB of RAM memory, of which 256KB can be used for user program code and data.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 6 digital input points of 24V DC.Digital outputs:...
|
In Stock
|
Subscribe
|
|
|
The TA565-9 is an I/O terminal blockSupply Voltage: Typically integrated in an AC500 system, powered with the system, typically 24VDC.Connection type: I/O terminal adapter for AC500 PLC systems to enable the connection between field devices and PLCs.Wiring: Spring-loaded front-end wiring, cable...
|
In Stock
|
Subscribe
|
|
|
Digital inputs: There are typically 8 to 16 digital input channels that can receive switching signals from sensors, switches, and other devices, typically in the voltage range of 12V to 24V DC.Analog input: Usually equipped with 4 to 8 analog input channels, it can receive standard analog signals...
|
In Stock
|
Subscribe
|
|
|
Model: TA5220-SPF7Product Description: The AC500-eCo terminal block set, which is a spare part for the option board, is a 7-pole spring terminal with a total of 7 pieces.IP20 protection level for a certain degree of protection against dust and foreign objects.
|
In Stock
|
Subscribe
|
|
|
Model: TA5220-SPF6.Product Description: The AC500-eCo terminal block set, which is a spare part for the option board, is a 6-pole spring terminal with a total of 6 pieces.IP20 protection level for a certain degree of protection against dust and foreign objects.
|
In Stock
|
Subscribe
|
|
|
Power Terminal Block: Provides power to the AC500-eCo V3 processor module, type removable 3-pin terminal block, spring front/cable side, 5.00mm pitch, 0.5mm² to 2.5mm² for solid and flexible copper conductors, 11mm stripping length.I/O Terminal Block: Includes 2 removable I/O connectors, both...
|
In Stock
|
Subscribe
|
|
|
Model: TA5212-TSCLProduct description: AC500-eCo V3 Screw terminal block set, screw front, cable side, 5.00mm pitch, suitable for PM503X, PM505X and PM507X.Power Terminal Block:Type: Removable 3-pin terminal block, screw front/cable side, 5.00mm pitch.Purpose: To provide power to the AC500-eCo V3...
|
In Stock
|
Subscribe
|
|
|
Interface type: Standard RS485 interface with isolation function, which can effectively prevent electrical interference and ensure the stability and reliability of communication.Communication protocols: It supports a variety of RS485-based communication protocols, such as MODBUS RTU, etc., and...
|
In Stock
|
Subscribe
|
|
|
IP20 protection level for a certain degree of protection against dust and foreign objectsFor the PM5012, it is provided with 1 power supply and 1 I/O connector with screw front/cable side connection.
|
In Stock
|
Subscribe
|
|
|
Interface type: Standard RS485 interface with isolation function, which can effectively prevent electrical interference and ensure the stability and reliability of communication.Communication protocols: It supports a variety of RS485-based communication protocols, such as MODBUS RTU, etc., and...
|
In Stock
|
Subscribe
|
|
|
Interface type: Standard RS-232 interface, which can realize serial communication with external devices such as computers, touch screens, other PLCs, etcCommunication protocol: It supports a variety of standard serial communication protocols, such as MODBUS RTU, etc., and can communicate with a...
|
In Stock
|
Subscribe
|
|
|
The TA5131-RTC is a real-time clock palette for ABB's AC500-eCo V3 series, which provides accurate real-time clock functionality for PLC systems, ensuring that the system can accurately record time and perform time-related control operations during operation.Operating voltage: Usually the...
|
In Stock
|
Subscribe
|
|
|
Applicable CPU: PM5072-T-2ETH(W).Internal Power Supply: Connected via internal CPU.Additional current draw from the CPU's 24V DC supply: 25mA max.Weight: 14g.Operating temperature: standard temperature range of 0°C to +55°C when installed horizontally; The wide temperature range is -20°C to...
|
In Stock
|
Subscribe
|
|
|
Number of output points: 2 analog output points.Output type: It can output voltage (U) and current (I) signals, which can meet the needs of different types of loads, such as driving electric control valves, frequency converters and other equipment.Output range: The voltage output range is...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 2 analog input points2.Input Type: RTD input, usually supports common RTD types such as Pt100, Pt1000, etc.2.Measuring range: Pt100 is generally around -200°C to +850°C; The PT1000 is generally more suitable for low to medium temperature measurements, and the measurement...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 2 analog input points.Input type: Thermocouple input, can be connected to many types of thermocouples, such as K type, J type, T type, etc., to adapt to different temperature measurement needs.Measuring range: The measuring range varies depending on the type of...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 2 analog input points1.Input Type: Voltage and current signals can be received, support 0V... 10V、0mA... 20mA、4mA... 20mA and other input range configurations1.Resolution: 12 bits, providing more accurate analogue measurements1.The module adopts galvanic isolation...
|
In Stock
|
Subscribe
|
|
|
Number of input points: Has 2 numeric input points.Input voltage: Generally 24V DC, standard 24V DC input signal is acceptable.Input Current: The input current is small, typically around a few milliamps, to ensure a good fit with commonly used 24V DC power supplies and sensors.Input Delay: The...
|
In Stock
|
Subscribe
|
|
|
The MC5102 is a memory card for ABB's AC500 series PLCsMemory capacity: 8GB.Memory type: Flash EEPROM, non-volatile, data is not lost after a power failure, and user programs and data can be reliably stored for long periods of time.IP20 protection level for a certain degree of protection against...
|
In Stock
|
Subscribe
|
|
|
Processing speed: The controller processing time is 0.0002ms.Memory: It has 1008KB of RAM memory, of which 256KB can be used for user program code and data.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: There are 6 digital input points of 24V DC.Digital outputs:...
|
In Stock
|
Subscribe
|
|
|
Power Terminal Block: Provides power to the AC500-eCo V3 processor module, type removable 3-pin terminal block, spring front/cable side, 5.00mm pitch, 0.5mm² to 2.5mm² for solid and flexible copper conductors, 11mm stripping length.I/O Terminal Block: Includes 2 removable I/O connectors, both...
|
In Stock
|
Subscribe
|
|
|
Number of output points: 4 digital output points1.Output type: Usually transistor output, can be switched on and off quickly, suitable for applications that require high-frequency output.Output Voltage: The operating voltage range is generally 12V to 220V1.Output current: The output current of...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 4 numeric input points.Input voltage: Typically 24V DC.Input Current: The typical input current is low, generally in the milliampere level, and the typical input current at each input point is about 3mA.Input Delay: The input signal has a short delay time, usually in the...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 8 digital input channels, i.e. 8DI15.Input voltage: 24VDCWiring: PCB terminal blocks with 9-position screw wiring for easy electrical connection5Operating Temperature: Typically within the ambient temperature range of -20°C to 60°C, some special models can accommodate a...
|
In Stock
|
Subscribe
|
|
|
Analog I/O modulesAnalog inputs: 4 channels, signal type is voltage (U), current (I)Analog outputs: 2 channels, signal type is voltage (U), current (I)Resolution: 12-bitConnection Type: PluggableDegree of protection: IP20Operating ambient temperature: 0°C to +60°CStorage ambient temperature:...
|
In Stock
|
Subscribe
|
|
|
Number of output points: 8 digital output channels.Output Type: Relay output.Output Voltage:Maximum switching voltage: AC 250V or DC 30V.Rated operating voltage: AC 24V or DC 24V.Output Current:Current rating per point: AC 2A or DC 2A.Maximum current per point: AC 3A or DC 3A.Common Side Maximum...
|
In Stock
|
Subscribe
|
|
|
Support a variety of baud rate options, usually including 2400, 4800, 9600, 19200, 38400, 57600, 115200bps, etc., interface type: standard RS485 interface, with isolation function, can effectively prevent electrical interference, to ensure the stability and reliability of...
|
In Stock
|
Subscribe
|
|
|
The TA564-11 is an accessory for ABB's I/O module and is a PCB terminal blockNumber of digits: 11 digitsWiring: Front-end screws, front-end wiringDegree of protection: IP20
|
In Stock
|
Subscribe
|
|
|
The TA564-9 is a terminal block product from ABBDegree of protection: IP20Wiring relatedNumber of digits: 9 digitsWiring: Front-end screws, front-end wiringPitch: 5.0mm
|
In Stock
|
Subscribe
|
|
|
The DO573 is a digital output module from ABB's AC500-eCo seriesNumber of output points and type: 8 normally open relay output channels 4.Output Voltage: Rated at 24V DC or 120/240V AC.Output current: 2A4 maximum per point.Power consumption: If it is AC power supply, the voltage range is between...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 16 digital input channels1.Input Voltage Type: AC, input voltage range from 100V AC to 240V AC1.Input current: Typically between 7mA (159V AC, 60Hz) per channel4.Input type: Type 14 according to EN 61131-2.Signal range: Signal 0(max.) is 20V AC; Undefined signal is 20V AC...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 4 analog input channels.Input Type: Configurable as a voltage or current input.Input Range:Voltages: -10V to +10V, -5V to +5V, 0V to +10V.Current: -20mA to +20mA, -10mA to +10mA, 0mA to +20mA, 4mA to 20mA.Resolution:Voltage input: 14 bits with signed bits (bipolar) or 15...
|
In Stock
|
Subscribe
|
|
|
Number of input points and type: 8 digital input points, which can be used as source or drain inputs, and the input voltage type is DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output points: 8 transistor output points.Output voltage type:...
|
In Stock
|
Subscribe
|
|
|
Memory: Has 7032KB of RAM memory.Processing speed: The controller processing time is 0.00002ms.Supply voltage: DC 24V, supply voltage range is 20.4-28.8V DC.Digital inputs: 12 digital input points of 24V DC.Digital outputs: 8 24V DC, 0.5A transistor digital output points, plus 2 configurable...
|
In Stock
|
Subscribe
|
|
|
Number of input points and type: 8 digital input points, which can be used as source or drain inputs, and the input voltage type is DC.Input Current: 5mA typical.Maximum input voltage: 0-30V.Delay time: 8ms typical.Number and type of output points: 8 relay output points5.Output Voltage: Rated at...
|
In Stock
|
Subscribe
|
|
|
Number of input points: 4 analog input channels.Input Type: Configurable as a voltage or current input.Input Range:Voltages: -10V to +10V, -5V to +5V, 0V to +10V.Current: -20mA to +20mA, -10mA to +10mA, 0mA to +20mA, 4mA to 20mA.Resolution:Voltage input: 14 bits with signed bits (bipolar) or 15...
|
In Stock
|
Subscribe
|
|
|
The TA563-11 is ABB's PLC module terminal blockNumber of digits: 11 digitsWiring: Front-end screw wiring or front-end spring wiring, side wiring or front-end wiringApplicable scenario: It is suitable for connecting AC500 (-eCo) series I/O modules and other related equipment to achieve signal...
|
In Stock
|
Subscribe
|
|
|
TA563-9: Analog Input ModuleStructure: modularInstallation: On-site installationLD Instruction Processor: Hard PLCI/O points: 16DIFunction: Analog input module, 4AIU/IResolution: 12-bitOperating voltage: 24VDCOutput frequency: 50HzProcessing speed: 5μs
|
In Stock
|
Subscribe
|
|
|
Number of output points: 16 digital output channels, 3 transistor outputs.Output Voltage: Rated operating voltage is 24V DC3.Output Current: 0.5A maximum current per point, common side maximum current not mentionedPower Consumption: The current drawn from a 24V DC supply is approximately 10mA;...
|
In Stock
|
Subscribe
|
|
| ABB AC500 | |||
Download Price List
Unsubscribe
Subscribe