750-337

750-338

750-343

750-352

The 750-362 Modbus TCP/UDP Fieldbus Coupler connects ETHERNET to the modular WAGO I/O System.The fieldbus coupler detects all connected I/O modules and creates a local process image.Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs.Both interfaces support autonegotiation and Auto-MDI(X).The DIP switch configures the last byte of the IP address and may be used for IP address assignment (DHCP, BootP, static).The coupler is designed for fieldbus communication in MODBUS networks.It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP(S), BootP, DHCP, DNS, SNMP, (S)FTP). An integrated Webserver provides user configuration options, while displaying the coupler's status information.The system supply is provided directly by the coupler. The field supply is provided via a separate supply module.

750-363

750-375

750-377

750-400

750-402

750-403

This digital input module features eight channels in a width of just 12 mm (0.47 inch). It receives control signals from digital field devices (e.g., sensors).Each input module has a noise-rejection filter.Field and system levels are electrically isolated.

750-438

This analog input module processes standard 4–20 mA signals.The input signal is electrically isolated and is transmitted with a resolution of 12 bits.The internal system supply powers the module.The input channels of the module have a common ground potential.

750-473

750-486

750-489

750-517

This digital output module features eight channels in a width of just 12 mm (0.47 inch).The module transmits control signals from an automation device to connected actuators.All outputs are short-circuit-protected.Field and system levels are electrically isolated.

750-554

750-563

After the fieldbus node is assembled with the correct buscoupler and I/O modules, the end module is snapped onto the assembly.It completes the internal data circuit and ensures correct data flow.

This supply module provides the I/O modules with the corresponding supply potential.The maximum current provided by the supply module is 10 A. When configuring the system, the total current must not be exceeded.Should higher currents be necessary, an intermediate supply module must be added to the assembly.

This potential multiplication module provides multiple tapping of the supply voltage.This module eliminates the need for additional rail-mount terminal blocks.

This potential multiplication module provides 0 V potential for the outputs of the 8-channel output module (750-530).This eliminates the need for additional DIN-rail-mount terminal blocks.The 24 V supply and 0 V potential are derived from the internal power jumper contacts of an adjacent upstream I/O module. A connection of the potentials to the downstream I/O modules is made automatically via the power jumper contacts when snapping the I/O modules together. The 0 V power is provided to all eight field side CAGE CLAMP connections and the 24 V potential passed through without being used by the module.®

750-606

750-613

This digital input module features 16 channels in a width of just 12 mm (0.47 inch).It receives binary control signals from digital field devices (e.g., sensors, encoders, switches or proximity sensors).The module features Push-in CAGE CLAMP® connections enabling solid conductors to be connected by simply pushing them in.Each input channel has a noise-rejection RC filter with 3.0 ms time constant.A green LED indicates the signal state of each channel.Field and system levels are electrically isolated.An operating tool with a 2.5 mm blade (210-719) is required to open the Push-in CAGE CLAMP® connections.

This digital output module features 16 channels in a width of just 12 mm (0.47 inch).It transmits binary control signals from the automation device to the connected actuators (e.g., magnetic valves, contactors, transmitters, relays or other electrical loads).The module features Push-in CAGE CLAMP® connections enabling solid conductors to be connected by simply pushing them in.A green LED indicates the signal state of each channel.Field and system levels are electrically isolated.An operating tool with a 2.5 mm blade (210-719) is required to open the Push-in CAGE CLAMP® connections.

750-1506