Model | FS-N13CP | |||
Type | High functionality 2 output | |||
Output | PNP | |||
Main unit/expansion unit | Main unit | |||
Control output | 2 | |||
External input | - | |||
Light source LED | Red, 4-element LED | |||
APC | ON/OFF switchable (Factory setting: OFF) | |||
Response time | 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |||
Number of interference prevention units | 0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA | |||
Unit expansion | Up to 16 units can be connected total (two output type is treated as two units) | |||
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less | ||
Current Consumption | Normal: 1050 mW or less (42 mA max. at 24 V, 56 mA max. at 12 V)*2 | |||
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less | ||
Ambient temperature | -20 to +55 °C -4 to +131 °F (No freezing)*3 | |||
Relative humidity | 35 to 85 % RH (No condensation) | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions | |||
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |||
Case material | Both main unit and expansion unit housing material: Polycarbonate | |||
Weight | Approx. 22 g | |||
*1 Use a cable length of 30 m 98.43' or less for M8 connector and e-CON connector types. | ||||
- USD
- CNY
- HKD
- EUR
- العربية
- čeština
- dansk
- Deutsch
- Ελληνικά
- English
- Español
- Français
- ic
- Italiano
- Netherlands
- norsk Språk
- język polski
- pt
- Português
- 中文
FS-N13N
Subscribe to get pricesModel: FS-N13N
Order No: FS-N13N
SKU: 10000069045901
Condition: New Sealed Under Guarantee
Size: 100.00 mm，120.00 mm，25.00 mm
Weight: 0.02kg
Brief Introduction
FS-N13N
ModelFS-N13CPTypeHigh functionality 2 outputM8 connector*1OutputPNPMain unit/expansion unitMain unitControl output2PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or lessExternal input-Light source LEDRed, 4-element LEDAPCON/OFF switchable (Factory setting: OFF)Response time50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Number of interference prevention units0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA(When set to double, the number of interference-prevention units will be doubled.)Unit expansionUp to 16 units can be connected total (two output type is treated as two units)RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent ConsumptionNormal: 1050 mW or less (42 mA max. at 24 V, 56 mA max. at 12 V)*2Eco on mode: 950 mW or less (38 mA max. at 24 V, 47 mA max. at 12 V)*2Eco Full mode: 600 mW or less (24 mA max. at 24 V, 29 mA max. at 12 V)Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or lessAmbient temperature-20 to +55 °C -4 to +131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialBoth main unit and expansion unit housing material: PolycarbonateWeightApprox. 22 g*1 Use a cable length of 30 m 98.43' or less for M8 connector and e-CON connector types.*2 Increases 100 mW (4.0 mA) for High Speed mode*3 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F).When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.
Description