The DLC - 02 - KN is a KNX to DALI gateway that can perform signal conversion between the DALI system and the KNX system. This device converts switch and dimming commands from the KNX system into DALI commands, and feedbacks the switch status and dimming status from the DALI bus back to the KNX system. Through two independent DALI buses, the DLC - 02 - KN can connect up to 128 DALI actuators. The DLC - 02 - KN can directly supply power to the DALI bus, so there is no need for an additional DALI line power supply. This device has multiple built - in illuminators, which are applicable to non - professional lighting control scenarios.In addition, the DLC - 02 - KN is equipped with many functions. The Sequence function allows users to customize multiple brightness values and color changes with a periodicity of 1 - 255 cycles or an infinite cycle, which is very suitable for entertainment and lighting applications. The DLC - 02 - KN has a built - in battery. Even if the AC power is cut off, the device's time and operation will continue to run. DLC - 02 - KN is applicable to scenarios where the time is relevant, so it can be used for time - setting applications, such as implementing loop operations and motion control. Besides, in combination with the KNX switch actuator (like KAA - 8R - S), it can achieve the function of turning off the lighting when the standby switch - off condition is met. When all DALI devices are turned off, the DLC - 02 - KN can notify the KNX controller (KBA - DALI) to control the AC input to enter a standby state.