Brief Introduction

PSE37-600-70

TechnicalRated Operational Voltage:208 ... 600 V ACRated Control Supply Voltage (Us):100 ... 250 V ACRated Control Circuit Voltage (Uc):24 V DCRated Frequency (f):50/60 HzMain Circuit 50 / 60 HzRated Operational Power - In-Line Connection (Pe):(230 V) 9 kW(400 V) 18.5 kW(500 V) 22 kWRated Operational Current - In-Line Connection (Ie):37 AService Factor Percentage:100 %Overload Protection:Build-in electronic overload protectionIntegrated Electronic Overload:YesStarting Capacity at Maximum Rated Current Ie:4xIe for 10sRamp Time:0 ... 30 second [unit of time]1 ... 30 second [unit of time]Initial Voltage During Start:30 ... 70 %Step Down Voltage Special Ramp:No %Current Limit Function:1.5 ... 7xIeSwitch for Inside Delta Connection:NoRun Signal Relay:YesBy-pass Signal Relay:YesFault Signal Relay:YesOverload Signal Relay:YesAnalog Outputs:4…20 mASignal Indication Completed Start Ramp (LED):GreenSignal Indication Ready to Start/Standby ON (LED):GreenSignal Indication Running R (LED):GreenSignal Indication Ramping Up/Down (LED):GreenSignal Indication Protection (LED):YellowSignal Indication Fault (LED):RedNumber of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:10Communication:Modbus-RTUDegree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00Terminal Type:Screw TerminalsConnecting Capacity Main Circuit:Hole Diameter 8.5 mmRigid 1/2 x 2.5 ... 70 mm²Width and Thickness 17.5x5 mmConnecting Capacity Control Circuit:Rigid 1 x 2.5 mm²Rigid 2 x 1.5 mm²Connecting Capacity Supply Circuit:Rigid 1 x 2.5 mm²Tightening Torque:Control Circuit 0.5 N·mMain Circuit 9 N·mSupply Circuit 0.5 N·mProduct Main Type:PSE37Function:Soft start with torque controlSoft start with voltage rampSoft stop with torque controlSoft stop with voltage rampKick startSequence startCurrent limitStart reverse (external contactors)Automatic restartEvent logProtection Function:Electronic overload protection, EOL; Locked rotor protection; Current underload protection